MP2501

UHF RADIO DATA TRANSCEIVER

 

Cost-Effective Wireless Solutions

  • Compact Size

  • Ranges Over 40km

  • Proven Reliability

  • Rugged Construction

  • Fast Switching

  • Simple Interfacing

The MP2501 is a crystal-controlled single channel miniature UHF transceiver featuring the very latest in RF design techniques and components. Specifically designed and optimised for the reception of audio bandwidth data, it is used in OEM equipment to provide a half-duplex wireless data link.

A CMOS compatible interface allows control of transmitter and receiver functions combining simplicity of use with high performance.

The receiver utilises low power consumption circuitry throughout to minimise current drain. Fast turn-on and off times allow power strobing to further enhance power drain.

The receiver performance, being the major factor in achieving good radio ranges, has been optimised by use of high quality miniature helical filters and high specification crystal filters.

UK type approval has been gained not only for the MPT1329 licence-exempt telemetry band but also the more rigorous scanning telemetry band specification, MPT1411, where receiver performance is tested.

Type approvals for non-UK countries have also been achieved. Please contact Magenta for an update.

Orders should specify in which country the units are to be used.

This model is also available in transmitter-only and receiver-only versions.

A range of modem boards is available to allow RS232 data streams to be sent.

 

Technical Details

General

RF Range

400-470MHz

Modulation

Narrow band angle modulation

Channel Spacing

12.5, 25, 50kHz (state with order)

RF Alignment Bandwidth

10MHz

TX risetime

<2ms

RX mute lift

<4ms

Audio bandwidth

300-3000Hz

Supply Voltage

9.5-16Vdc

Operating Temperature

-20 to +60° C

Dimensions

86 x 62 x 17mm exc. connectors

Humidity

95% RH, non-condensing

Shock

BS2011 Part 2.1Ea, 30g 18ms

Vibration

BS2011 Part 2.1Fd Region A, Cat. 4, 10-1000Hz for 1 hour

Acceleration

BS2011 Part 2.1Ga, ±4g any axis

Specification Compliances

ETS 300 086, ETS 300 220, FCC Part 90

 

Technical Details

Transmitter Section

Frequency Error

3ppm over -20 to +60° C

RF Output

500mW (lower powers available-state with order)

Modulation Level

±2.0kHz at 1kHz

Adjacent Channel

-65dBc

Current Consumption

270mA at 12V (VSWR1.5)

 

Technical Details

Receiver Section

Frequency Error

3ppm over -20 to +60° C

Sensitivity

0.3uV PD for 12dB SINAD

Selectivity

65dB

Intermodulation

60dB

Blocking

88dB

Mute

Optional

Current Consumption

16mA

 

Technical Details

Connections

1

+V

Positive supply

2

TXON

TX enable, TTL active high

3

TXA

TX audio input, 500mV rms

4

0V

Ground, negative supply

5

RXA

RX audio output, 150mV rms

6

/CD

RX carrier detect, TTL active low

7

RXON

RX enable, TTL active high

Coaxial SMB

50 ohm antenna connection